PTFE (TEFLON) CONVOLUTED TRANSFER HOSE
CONSTRUCTION : Inner Core of Corrugated Teflon,
with stainless steel wire braided reinforcement.
TEMPERATURE : 54°C To + 204°C (65°F to +460°F)
Teflon corrugated hose is capable of handling almost all chemicals. It is widely used in chemical, petrochemical, food and pharmaceutical industry. Specially used for bulk Transfer of Oil, lubricants, paints, food products and wide range of Chemicals. High resistance to thermal cycling, used in various Types of steam service where on-off operating cycles cause wide temperature fluctuations inside the hose. Highly flexible and can withstand severe conditions of continuous flexing & vibration without failure.
|Nominal Sizes,Inches||Nominal O.D. Inches||Operating Pressure PSI at Room Temp.||Minimum Bend Radius inches||Hose Weight lb./ff.|
|1 1/4||1.560||1,000||6 1/4||.48|
|1 1/2||1.792||750||7 1/2||.61|
TEFLON FLARED HOSE ASSEMBLY
PTFE liner tube is extended through the bore of the end fittings, then ﬂared out to form the sealing face.