The principle behind the design of Camlock Coupling is simple. Pivot pins for coupler cam arms which lock into the adaptor groove are located so that when line pressure attempts to force the camlock coupler and adaptor apart, the bottom edge of the adaptor groove pushes with equal pressure against the under edge of the cam arms, increasing the locking action. When properly coupled, line pressure will not separate a camlock connection within recommended pressure limits
End Connection
Socket Weld, Hose thread, Pipe thread, Hose shank and Flanged.
Sizes : ½” to 6”
Working Pressure : Upto 500psi.
Temperature
The coupling can handle fluids from (-40°C) to 250°C with right selection of body material and Gasket.
Materials
| Body |
|
| Cam Arms | Available in casting of SS304 (CF8), SS316 (CF8M), SS316L (CF3M) Gunmetal grade LG2C & Aluminium Bronze grade AB2C |
| Gasket | Available in Nitrile, Viton, Neoprene, Silicone, Hypalon, PTFE or as per client's requirment |
| Standard | Our Camlock Couplings Comply to BS EN 14420 & applicable MIL specification like MIL-C-27487 |